Boynton Beach AC installation
AC installation and replacement in Boynton Beach, FL
A new air conditioning system performs the way it was installed, not the way it was advertised. Correct sizing, adequate return air, a proper drain and float switch, the right breaker and disconnect, and a verified refrigerant charge matter more to your comfort and power bill than the badge on the equipment.
We install and replace systems throughout Boynton Beach — single-family homes, villas, 55+ communities, and condominiums — with the permit pulled and the inspection met. 35+ Years in Business.
- Load calculation, not a tonnage guess
- Duct and return air evaluated before equipment is chosen
- Permit pulled, inspection met, documentation provided
- HOA and condo approval requirements accounted for up front
35+ Years in Business · Licensed & Insured AC and Electrical Technicians · Open 24 hours · 7 days a week · 24/7 Emergency Service
What is included
What a real installation covers
Load-calculated sizing
Square footage, insulation, glass, orientation, and duct capacity — not simply matching the tonnage of the system being removed.
Complete system replacement
Condenser, air handler or coil, line set evaluation, pad, disconnect, drain, and thermostat treated as one system rather than a box swap.
Duct and return corrections
Undersized returns and leaking trunk lines are the most common reason a new system underperforms. We measure and fix what matters.
Heat pump and high-efficiency options
Variable-speed and heat pump equipment where the house and the electrical service actually support it, explained in plain terms.
Permitting and inspection
Mechanical permit pulled through the City of Boynton Beach or Palm Beach County, inspection met, documentation handed to you.
Electrical side done right
Breaker sizing, disconnect, and whip verified for the new equipment — we do electrical work in-house, so this is not someone else's problem.
Process
From evaluation to passed inspection
- Step 1
In-home evaluation
We look at the existing equipment, the duct system, the returns, the electrical feed, the drain path, and where the condenser can legally and practically sit.
- Step 2
Sizing and options
A load calculation drives the tonnage. You get options at different efficiency levels with the trade-offs stated honestly, including which ones your ductwork can actually support.
- Step 3
Written proposal
Equipment, scope, permit, warranty terms, and price in writing. If HOA approval is needed, we give you the detail your association will ask for.
- Step 4
Permit and scheduling
We pull the mechanical permit and schedule the install. In condos and gated communities we coordinate with management for access and work hours.
- Step 5
Installation day
Old equipment removed, new equipment set, line set evaluated or replaced, drain and float switches installed correctly, electrical verified, system charged to spec.
- Step 6
Commissioning and inspection
Airflow and charge verified by measurement, thermostat configured, registration and warranty filed, and the county or city inspection met.
Choosing equipment
Sizing, efficiency, and what your house can use
Bigger is not better here. An oversized system cools the air quickly, satisfies the thermostat, and shuts off before it has removed enough moisture — which is why an oversized house feels cold and damp at the same time. Right-sized equipment runs longer cycles and dehumidifies properly, which is what comfort in South Florida actually depends on.
Efficiency is the second decision. Higher SEER2 and variable-speed equipment genuinely lowers operating cost and improves humidity control, but only if the duct system can move the air and the house is reasonably tight. If your returns are undersized, the honest recommendation is to fix the ducts and buy mid-tier equipment rather than buy premium equipment that will be throttled.
Finally, the small parts are not small: a secondary drain pan and working float switch, a properly supported line set, a correctly sized breaker and disconnect, and a charge verified by measurement instead of by feel. Those are the items that determine whether you call us again in three years.
Licensed, insured, and permitted
Delray Beach Air Conditioning & Electrical is a collective of licensed electricians and air conditioning technicians. Work is performed by licensed, insured crews, including permitting and inspection where your municipality requires it. Open 24 hours · 7 days a week.
Cost
What drives installation price
| What changes the price | Why it matters |
|---|---|
| System size and efficiency level | Tonnage and SEER2 rating are the largest single input. Higher-efficiency variable-speed equipment costs more up front and only pays off in the right house. |
| Equipment type | Straight-cool split, heat pump, packaged unit, or ductless — each has a different equipment and labor profile. |
| Duct and return work | If the existing return is undersized or the trunk leaks, correcting it is part of making the new system perform as rated. |
| Access and placement | Attic air handlers, hall closets, second-floor condos, and rooftop or crane-set equipment all change labor. |
| Electrical requirements | New equipment sometimes needs a different breaker, disconnect, or whip — and occasionally a panel that has capacity for it. |
| Permit and inspection | Permit fees and the inspection are a real line item on a legitimate installation, and they belong in the written price. |
Every proposal is written, with equipment specified and the permit included, so you can compare quotes on the same terms.
Local context
Boynton Beach specifics
- Much of Boynton Beach was built between the mid-1970s and the 1990s, so the duct system a new unit inherits is often original — and frequently undersized on the return side for modern equipment.
- Villa, 55+, and condominium associations commonly require architectural approval before a condenser is relocated, a pad is added, or equipment becomes visible from common area. Plan for that timeline before scheduling install day.
- Replacement work in the city limits permits through the City of Boynton Beach; properties in unincorporated Palm Beach County permit through the county. Either way there is an inspection.
- Coastal and near-Intracoastal properties see real condenser coil corrosion. Coil coatings and placement out of direct salt spray meaningfully extend equipment life on the east side of the city.
- Seasonal residents benefit disproportionately from a smart or communicating thermostat, since humidity control in an empty house is the thing that protects the interior.
- Homes with an original electrical panel sometimes need the breaker and disconnect corrected as part of the install; because we hold both trades in-house, that does not become a second contractor and a second trip.
Boynton Beach AC installation questions
Contact
Request service
Tell us what's going on and when you'd like us out. For anything that feels like a safety issue — burning smell, scorched outlet, sparking — call instead.
- (561) 816-5331
- admin@acdelray.com
- 956 SW 20th Ct, Delray Beach, FL 33445
- Open 24 hours · 7 days a week
24/7 Emergency Service